Author Guidelines

The author must send the manuscript online by first registering as an author to the website http://www.ejournal.pelitaindonesia.ac.id/ojs32/index.php/JOISIE/user/register for every submitted article, the author is obliged to follow the terms and conditions in accordance with Style Guide of JOISIE (Journal Of Information Systems And Informatics Engineering)  can be download here

Instructions for author of JOISIE (Journal Of Information Systems And Informatics Engineering)


  • The text submitted by the author is the original scientific paper, has never been published, and is not being submitted for publication in other media / journals
  • The text proposed may be results of the study (field / literature) Soft Computing, Information System and Technology, Information Assurance and Security and Software Engineering.
  • Scripts can be written either in Indonesian. The manuscript is written with Times New Roman of font 12 with multiple (1.15) spacing and two colum format.
  • Article Format has met the Article Template JOISIE (Journal Of Information Systems And Informatics Engineering)
  • The article must be under 15 % check by plagiarism software
  • The article does not contain the results of plagiarism, falsification, and fabrication of data.

 Paper Title


This is your opportunity to attract the reader’s attention. Remember that readers are the potential authors who will cite your article. Identify the main issue of the paper. Begin with the subject of the paper. The title should be accurate, unambiguous, specific, and complete. Do not contain infrequently-used abbreviations. The title of the paper should be in 12 pt bold Font Times New Roman and be centered. (Max: 12 Word)

Authors Name and Affiliations


Write Author(s) names without a title and professional positions such as Prof, Dr, Production Manager, etc. Do not abbreviate your last/family name. Always give your First and Last names. Write clear affiliation of all Authors. Affiliation includes a name of department/unit, (faculty), a name of university, address, country. Please indicate Corresponding Author (include email address) by adding an asterisk (*) in superscript behind the name.

Abstract


The word “Abstract” should put in left, bold, 8 point, paragraf space after 6 poin. Abstract should contain summary of the all research (aim, scope, result and conclusion) with maximum 200 words, justified, 11 point, and line spacing : single. For keywords wrote in italic and then separated using symbol (,) with maximum are 6 words.

Introduction


In Introduction, Authors should state the objectives of the work at the end of introduction section. Before the objective, Authors should provide an adequate background, and very short literature survey in order to record the existing solutions/method, to show which is the best of previous researches, to show the main limitation of the previous researches, to show what do you hope to achieve (to solve the limitation), and to show the scientific merit or novelties of the paper. Avoid a detailed literature survey or a summary of the results.

To prepare your paper, use directly this template and simply replace this text by your text.  These instructions are to be followed strictly, and it is strongly advised to use the styles indicated in this document between square brackets. It is strongly advised NOT to use formatting or styles in your paper different from the ones mentioned here.

The structure of manuscripts should follow the following order; title, authors, affiliations, abstract, keywords, main text, (acknowledgement), (appendix), (nomenclature), references. The items with parentheses are not mandatory.

The maximum pages printed in JOISIE are supposed to be 6. Do NOT include page numbers. Do NOT add Headers or Footers. Prescribed font is Times New Roman, 11 points, with an single line spacing. However, if your text contains complicated mathematical expressions or chemical formulae, you may need to increase the line spacing. Running text should be justified.

Section Headings


The way chapter titles and other headings are displayed in these instructions is meant to be followed in your manuscript.

Level 1: Times New Roman, 11, Bold, 6 pt spacing before heading, 6 pt spacing after heading.
Successive Levels: Times New Roman, 8, Bold, 6 pt spacing before heading, NO spacing below the heading.

Do NOT begin a new section directly at the bottom of the page, but transfer the heading to the top of the next page. Cite the main scientific publications on which your work is based. Cite only items that you have read. Do not inflate the manuscript with too many references. Avoid excessive self‐citations. Avoid excessive citations of publications from the same region. Check each reference against the original source (authors name, volume, issue, year, DOI Number).

Please use Reference Manager Applications like EndNote, Mendeley, Zotero, etc. Use other published articles in the same journal as models. If you cite using Mendeley please use Elsevier Harvard (With Title) for cite model style of this journal.

Footnotes


It is requested not to us any of footnotes. All references should be in the References. Explanations should be preferably included in the text.

Symbols and units, numbers


If symbols are defined in a nomenclature section, symbols and units should be listed in alphabetical order with their definition and dimensions in SI units. Please use the SI set of units as much as possible. Wherever the application domain uses a different set of units widely, please minimize the use of non-standard units or non-standard symbols for those units. As examples, the use of “a” for the year (annum) is depreciated and the use of “y” is encouraged instead. Similarly, “h” should be used for hours instead of “hr” and “t” instead of “ton” or “tonne”. It is important to take care of the case in which the measurement units are typed. E.g. “Km” does not mean “kilometers”, but “Kelvin-meters”.
When providing numerical values followed by measurement units, please leave a regular space or non-breaking space between each value and the measurement unit. This also includes percentages and degrees Celsius (e.g. 42 % or 35 %, 234 °C, 504 K). This rule also applies to the unit for a litre, which is recommended to be capital “L”. The authors are encouraged to render the numbers according to the International rules, specifying the dot as a decimal separator and the comma as a thousand separator.

 Equations


Make sure that placing and numbering of equations are consistent throughout your manuscript.

 

Left aligns the equation and put the number of the equation flush-right, using a Right Tab on the right margin. Please reference equations in the text by writing: Eqn. .. (do not use Equation ..) In principle, variables are to be presented in italics.

Figures and Tables


Figures and tables should be originals or sharp prints. Please use the SI set of units as much as possible. Figures and tables should be centered and placed either at the top or at the bottom of the page. Please do not render tables as pictures and please do not use too small font sizes in the illustrations. Please use the following fonts in your illustrations: Times New Roman, Symbol, or use fonts that look similar.

If your figures and tables are created in a Microsoft Office application (Word, PowerPoint, Excel) then please supply 'as is' in the native format, too. Regardless of the application used other than Microsoft Office, when your electronic artwork is finalized, please 'Save as' or convert the images to one of the following formats (note the resolution requirements for line drawings, halftones, and line/halftone combinations given below):

    EPS (or PDF): Vector drawings, embed all used fonts.
    TIFF (or JPEG): Color or grayscale photographs (halftones), keep to a minimum of 300 dpi.
    TIFF (or JPEG): Bitmapped (pure black & white pixels) line drawings, keep to a minimum of 1000 dpi.
    TIFF (or JPEG): Combinations bitmapped line/half-tone (color or grayscale), keep to a minimum of 500 dpi.

Set table number and title flush left above table. Horizontal lines should be placed above and below table headings and at the bottom of the table. Vertical lines should be avoided. The title should use Times New Roman 11, with 10 pt before and 4 pt after the paragraph, left-justified at the top of the table. Tables have to be included in the text. If a table is too long to fit one page, the table number and heading should be repeated on the next page before the table is continued. Alternatively the table may be spread over two consecutive pages (first an even numbered, then an odd-numbered page) turned by 90, without repeating the heading.

Figure captions


Fig. 1 Captions should be placed below each illustration, font Times New Roman, 10 pts. Figures and figure captions should be placed center; two narrow figures may be placed side-by-side. Please reference figures in the text by writing: Fig. .. (do not use Figure ..).

Concerning references
In order to give our readers a sense of continuity, we encourage you to identify JOISIE articles of similar research in your papers. Please, do a literature check of the papers published in JOISIE in recent years at Journal. http://www.ejournal.pelitaindonesia.ac.id/ojs32/index.php/JOISIE/issue/archive

For citation and model citation we are using Elsevier Harvard (with title), you can find it using Mendeley or other reference manager program or using citation machine on the internet, such as http://www.citationmachine.net/elsevier-harvard/cite-a-report/manual.

References must be listed at the end of the paper. Do not begin them on a new page unless this is absolutely necessary. Authors should ensure that every reference in the text appears in the list of references and vice versa. Indicate references by (Putra and Nasien, 2016), (Natasia et al., 2016)  or (Selley et al., 2005).

Recommendations for references are:

Book

Rothery, D.A., 2008. Geology. McGraw-Hill Companies, Blacklick, OH.

Or

Selley, R., Robin, L., Cocks, M., Plimer, I., 2005. Encyclopedia of Geology. Geology 3345. doi:10.1016/B0-12-369396-9/00102-7

Magazine

Geo 2010 hailed as the best Geoscience event in Mideast., 2012. Oil & Gas News.

 Journal

Schopf, T.J.M., 1978. The Structure of Geology. David B. Kitts. The Journal of Geology 86, 278–279. doi:10.1086/649684

 Thesis

Coons, R.L., 1966. Precambrian basement geology and Paleozoic structure of the mid-continent gravity high. (thesis).

 Dissertation

Beukeboom, T.J., 1976. The hydrology of the Frisian Islands (dissertation).

Acknowledgements


Collate acknowledgments in a separate section at the end of the article before the references and do not, therefore, include them on title page, as a footnote to the title or otherwise. List here those individuals who provided help during the research (e.g., providing language help, or proof reading the article, etc.). Acknowledgment can be written in this paper or not. Using 11 pt font Times New Roman, 6 pt after headings.

References


Redman, P., 2006. Good essay writing: a social sciences guide. 3rd ed. London: Open University in assoc. with Sage.

Boughton, J.M., 2002. The Bretton Woods proposal: an in depth look. Political Science Quarterly, 42 (6),pp.564-78.

UNDESA (United Nations Department of Economic and Social Affairs), 2005. 6th Global forum on reinventing government: towards participatory and transparent governance. Seoul, Republic of Korea 24-27 May 2005. United Nations: New York.

Brown, J., 2005. Evaluating surveys of transparent governance. In: UNDESA (United Nations Department of Economic and Social Affairs), 6th Global forum on reinventing government: towards participatory and transparent governance. Seoul, Republic of Korea 24-27 May 2005. United Nations: New York.

Richmond, J., 2005. Customer expectations in the world of electronic banking: a case study of the Bank of Britain. Ph. D. Chelmsford: Anglia Ruskin University.

National electronic Library for Health, 2003. Can walking make you slimmer and healthier? (Hitting the headlines article) [Online] (Updated 16 Jan 2005)